Print the plastic parts

If you have bought the plastic parts you can skip this step!

For this section you will need:

50 g of Black PLA filament
200 g of PLA filament - Of any colour you want. Two contrasting colours may look best.

Now you have tested your printer and filament you can print the following parts:

Actuator assembly tools (nut tool, band tool, and band tool cover): actuator_assembly_tools.stl
Lens tool: lens_tool.stl
Main body: main_body.stl - The smart brim may require custom print settings.
3 cable tidy caps: cable_tidies.stl
Sample clips: sample_clips.stl
Microscope stand: microscope_stand.stl
Pi stand: pi_stand.stl
3 small gears: small_gears.stl
Illumination dovetail: illumination_dovetail.stl
Condenser arm: condenser.stl
Illumination thumbscrew: illumination_thumbscrew.stl
3 large gears: large_gears.stl
3 feet: feet.stl
Optics module: optics_picamera_2_rms_f50d13.stl - This must be printed in black!
pi camera cover: picamera_2_cover.stl

Be careful when removing brim

To avoid injury first peel off the bulk of the brim by hand. Remove the remaining brim with a peeling action.

Carefully remove the printing brim from all parts (except the main body) with a utility knife.