Low-cost microscope

This is a lower cost version of the OpenFlexure Microscope. It supports uses the lens from the Raspberry Pi Camera to produce a microscope with a similar field of view to a 20x objectives. It is motorised, but you can also build it as a manual microscope.

If you use this microscope for research please consider citing our paper in Optics Express.

Before you start building the microscope you will need to source all the components listed our bill of materials (csv).

The assembly is broken up into several steps:

1. Test your printer
2. Print the plastic parts
3. Solder the LED
4. Prepare the main body
5. Prepare the microscope stand
6. Assemble the actuators
7. Assemble the basic optics module
8. Mount the optics and the microscope
9. Assemble the illumination
10. Assemble the motors
11. Attach the sample clips
12. Complete the wiring

Next page