Attach the sample clips
For this section you will need:
Parts
Tools
Mechanical Components
Step 1: Prepare the sample clips
![](../renders/mount_sample_clips_rms1.png)
![](../renders/mount_sample_clips_rms2.png)
![](../renders/mount_sample_clips_rms1.png)
- Take one sample clip.
- Insert an M3x10 cap screw through the hole at the end of the clip.
- Repeat for the other clip
Step 2: Attaching the sample clips
![](../renders/mount_sample_clips_rms3.png)
![](../renders/mount_sample_clips_rms4.png)
![](../renders/mount_sample_clips_rms3.png)
- Insert a 2.5mm Ball-end Allen key through the hole in the curved part of a clip, and into the screw.
- Screw the clip down onto the microscope stage.
- Repeat for the other clip.