Attach the sample clips

For this section you will need:

Parts

1 Sample clips

Tools

1 2.5mm ball ended Allen key

Mechanical Components

2 M3x10 cap head screws

Step 1: Prepare the sample clips

Take one sample clip.
Insert an M3x10 cap screw through the hole at the end of the clip.
Repeat for the other clip

Step 2: Attaching the sample clips

Insert a 2.5mm ball ended Allen key through the hole in the curved part of a clip, and into the screw.
Screw the clip down onto the microscope stage.
Repeat for the other clip.

Previous page | Next page