Low-cost microscope

TODO: Add blurb about microscope

Before you start building the microscope you will need to source all the components listed our bill of materials (csv).

The assembly is broken up into several steps:

  1. Test your printer
  2. Print the plastic parts
  3. Prepare the main body
  4. Prepare the microscope stand
  5. Assemble the actuators
  6. Assemble the basic optics module
  7. Mount the optics and the microscope
  8. Assemble the illumination
  9. Assemble the motors
  10. Attach the sample clips
  11. Complete the wiring

Next page