The OpenFlexure Microscope is a 3D printable microscope, with a very precise mechanical translation stage. The microscope is highly customisable. Find about more about the microscope on the OpenFlexure website

These instructions will take you through how to assemble various configurations. The also describe how to make a Sangaboard Compatible motor controller if you can't get hold of an official one.

Microscope Configurations:

High-resolution motorised microscope

This configuration of the microscope uses a traditional microscope objective for highest image quality.

Motorised microscope with low-cost optics

This configuration of the microscope uses the original lens from a Raspberry Pi camera module.