10mm Stage riser

This raises the stage up by 10mm, for longer objective lenses on the OpenFlexure Delta Stage

Parts

5 M3x6mm screw

Tools

1 2.5mm hex screwdriver

3D printed parts

1 10mm riser
2 sample clip - Both sample clips are in the one file.

Method

Step 1: Attach the petri dish holder to the stage

Screw the 10mm riser to the main body with three M3x6mm screws using a 2.5mm hex screwdriver.

Step 2: Attach the sample clips

Screw the sample clips to the 10mm riser using two M3x6mm screws using a 2.5mm hex screwdriver.